Jelly Filled Telecom Cables

Product Details:

• For signal and data transmission used in measurement and control techniques such as in control room at industrial plants, power stations, refineries, petrochemical plants.
• Suitable for underground applications.
• Twisted Pair, Triad/Quad construction with short pitch individual aluminum tape shielding, offers excellent immunity to crosstalk and low frequency (up to 10 KHz) electrostatic and electromagnetic interference.
• For BS 5308, these cables are designed for use in communication and instrumentation applications in and around process industries like oil exploration, cement, paper, steel, power generation and others.

• High current carrying capacity
• Low conductor resistance
• Oil and flame resistance
• Heat Resistant
• Excellent flexibility
• Ozone resistant
• Exceptional mechanical properties

Product Details:

• These cables are used for distribution in Exchange area and usually conduit or direct burial application
• Suitable for underground applications.
• Twisted Pair, Triad/Quad construction with short pitch individual aluminum tape shielding, offers excellent immunity to crosstalk and low frequency (up to 10 KHz) electrostatic and electromagnetic interference.
• For BS 5308, these cables are designed for use in communication and instrumentation applications in and around process industries like oil exploration, cement, paper, steel, power generation and others.

• Conductor: Soft-annealed solid electrolytic copper
• Armouring: Galvanised steel tape, double steel tape
• Outer Sheath: Polyethylene, PVC ST1
• Multi-pair
• Flame retardant (Fire Resistance) test as per IS: 10810-Part 61
• Carbon black content, 2.5% min as per BS: 6234
• Volume resistivity at 100°C is ≥ 1 x 1010 W.cm
• Laid up pairs flooded with water-resistant jelly.
• Longitudinally applied polyethylene coated aluminum moisture barrier tape
• PE inner sheath / outer sheath, Spark test at 11 kV AC
• Near end crosstalk between adjacent pairs – better than 55 dB
• Far end cross-linked talk between adjacent pairs – better than 67.8 dB/km

• Up to 2400 pairs
• Uniformly drawn circular solid copper conductor
• MDPE / HDPE extruded insulation
• Insulation resistance not less than 5000 mW (VR not less than 1×1015 W cm)

• These cables are used for distribution in Exchange area and usually conduit or direct burial application
• Suitable for underground applications.
• Twisted Pair, Triad/Quad construction with short pitch individual aluminum tape shielding, offers excellent immunity to crosstalk and low frequency (up to 10 KHz) electrostatic and electromagnetic interference.
• For BS 5308, these cables are designed for use in communication and instrumentation applications in and around process industries like oil exploration, cement, paper, steel, power generation and others.

• Conductor: Soft-annealed solid electrolytic copper
• Insulation: Polyethylene
• Inner Sheath: Polyethylene
• Armouring: Galvanised steel tape, double steel tape
• Outer Sheath: Polyethylene, PVC ST1
• Colour: As per customer spec
• Multi-pair

• Specification: BSNL Spec. No. GR / CUG-01/03, Aug. 2003
• Flame retardant (Fire Resistance) test as per IS: 10810-Part 61
• Carbon black content, 2.5% min as per BS: 6234
• Volume resistivity at 100°C is ≥ 1 x 1010 W.cm
• Nominal mutual capacitance 0.05 mF/km
• Capacitance unbalance between pairs ≤ 300 pF
• Spark test voltage 3 kV AC
• Laid up pairs flooded with water resistant jelly.
• Longitudinally applied polyethylene coated aluminium moisture barrier tape
• PE inner sheath / outer sheath, Spark test at 11 kV AC
• Near end crosstalk between adjacent pairs – better than 55 dB
• Far end cross-linked talk between adjacent pairs – better than 67.8 dB/km

• Up to 2400 pairs
• Uniformly drawn circular solid copper conductor
• MDPE / HDPE extruded insulation
• Insulation resistance not less than 5000 mW km (VR not less than 1×1015 W.cm)

Product Details:

Siechem is India’s No.1 leading manufacturer & exporter of Telecommunication

Cables. Equipped with most sophisticated, state-of- the-art jelly-filled

telecommunication cable plant, fully equipped testing lab and highly skilled

technical personnel, the cables are manufactured to every national and

international standard covering from 5 pairs upto 2400 pairs with conductors of

sizes 0.4mm / 0.5mm / 0.63mm and 0.9mm.These water resistant landline cables

ensures best communication and data transmission needs throughout the year

even during the hostile weather conditions

Specification: GR/CUG-01/03 & customized to your specification

Features

 Upto 2400 pairs

 Uniformly drawn circular solid copper conductor

 MDPE / HDPE extruded insulation

 Insulation resistance not less than 5000 m.km (VR not less than 1x10 15

.cm)

Applications

These cables are used for distribution in Exchange area and usually conduit or

direct burial application

Product Construction

 Conductor : Soft-annealed solid electrolytic copper

 Insulation : Polyethylene

 Inner Sheath : Polyethylene

 Armouring : Galvanized steel tape, double steel tape

 Outer Sheath : Polyethylene, PVC ST1

 Colour : As per customer spec

Technical Data

 Flame retardant (Fire Resistance) test as per IS : 10810-Part 61

 Carbon black content, 2.5% min as per BS : 6234

 Volume resistivity at 100°C is ≥ 1 x 10 10 .cm

 Nominal mutual capacitance 0.05 F/km

 Capacitance unbalance between pairs ≤ 300 pF

 Spark test voltage 3 kV AC

 Laid up pairs flooded with water resistant jelly.

 Longitudinally applied polyethylene coated aluminium moisture barrier tape

 PE inner sheath / outer sheath, Spark test at 11 kV AC

 Near end cross talk between adjacent pairs – better than 55 dB

 Far end cross linked talk between adjacent pairs – better than 67.8 dB/km

Approvals

 ISO 9001, ISO 14001, OHSAS 18001

 BSNL

Leading Customers: BSNL, MTNL, Larsen & Toubro & more