Siechem Technologies Pvt. Ltd
Errabalu Chetty Street, Chennai, Tamil Nadu
GST No. 33AAGCS0703F1ZX
TrustSEAL Verified
Call 0804763749786% Response Rate
SEND EMAIL
Siechem is leading manufacturer & exporter of Wind Energy Cables. These cables are manufactured with electrolytic high conductivity 99.9% pure copper, insulated with PVC / HDPE / Electron Beam Irradiated Elastomeric compound, shielded with Al.mylar tape with ATC drain wire, screened with ATC braiding, sheathed with PVC / EBXL-XLPO compound having enhanced UV properties and flexibility.
Product Details:
| Insulation Material | PVC |
| Armoured | Yes |
| Conductor Type | Stranded |
| Size | 19.2mm |
| Number of Core | 4 Core |
Siechem is leading manufacturer & exporter of Wind Energy Cables. These cables are manufactured with electrolytic high conductivity 99.9% pure copper, insulated with PVC / HDPE / Electron Beam Irradiated Elastomeric compound, shielded with Al.mylar tape with ATC drain wire, screened with ATC braiding, sheathed with PVC / EBXL-XLPO compound having enhanced UV properties and flexibility.
Specification: VDE 0282, UL 21098, IEC 60227, IEC 60502-1 & customized to your specification.
Types of Cable: SIS / XHHW-2, RHH / RHW-2, UL Type TC & UL Type SIS Type SIS / XHHW-2.
Features
Electron beam cross linked
No flame propagation
Low corrosivity of gases
Excellent Flame retardant, UV protection & Ozone resistance
Highly resistive to oil, chemicals, soil and mechanical damage
High insulation performance
Lower transfer impedance
Highly short circuit rated and earth fault resistant cable
Low smoke density
Applications
Used in dry, damp interiors, switch cabinets, electronic equipment, trains, buses and high voltage applications
Used in wind turbines and transmission of energy from generator to transformer
Used in Power lines of fixed routing in wind tower installation
Used for measuring and controlling purposes in wind turbines
Used for main power layout from the nacelle to the base of the wind tower
Used in mobile equipments and agricultural machinery
Product Construction
Conductor : Soft-annealed electrolytic copper
Insulation : Rubber compound, PVC, EPR & EBXL-XLPO.
Outer Sheath : Polychloroprene rubber compound, PVC & HF XL EVA.
Single or multicore, shielded / unshielded.
Technical Data
Temperature Range :
i) For PVC -40°C to +70°C & +90°C
ii) For EPR -40°C to +125°C
Voltage Rating : 600V, 0.6/1.0 kV, 1.8/3 kV
Approvals
ISO 9001, ISO 14001, OHSAS 18001
RoHS compliance & REACH compliance
Leading Customers
Gamesa Renewable Pvt.Ltd, Popular system, Regen Power Tech & overseas customers.
Product Details:
| Insulation Material | PVC |
| Armoured | Yes |
| Conductor Type | Stranded |
| Size | 19.2mm |
| Number of Core | 4 Core |
Siechem is leading manufacturer & exporter of Wind Energy Cables. These cables are manufactured with electrolytic high conductivity 99.9% pure copper, insulated with PVC / HDPE / Electron Beam Irradiated Elastomeric compound, shielded with Al.mylar tape with ATC drain wire, screened with ATC braiding, sheathed with PVC / EBXL-XLPO compound having enhanced UV properties and flexibility.
Specification: VDE 0282, UL 21098, IEC 60227, IEC 60502-1 & customized to your specification.
Types of Cable: SIS / XHHW-2, RHH / RHW-2, UL Type TC & UL Type SIS Type SIS / XHHW-2.
Features
Electron beam cross linked
No flame propagation
Low corrosivity of gases
Excellent Flame retardant, UV protection & Ozone resistance
Highly resistive to oil, chemicals, soil and mechanical damage
High insulation performance
Lower transfer impedance
Highly short circuit rated and earth fault resistant cable
Low smoke density
Applications
Used in dry, damp interiors, switch cabinets, electronic equipment, trains, buses and high voltage applications
Used in wind turbines and transmission of energy from generator to transformer
Used in Power lines of fixed routing in wind tower installation
Used for measuring and controlling purposes in wind turbines
Used for main power layout from the nacelle to the base of the wind tower
Used in mobile equipments and agricultural machinery
Product Construction
Conductor : Soft-annealed electrolytic copper
Insulation : Rubber compound, PVC, EPR & EBXL-XLPO.
Outer Sheath : Polychloroprene rubber compound, PVC & HF XL EVA.
Single or multicore, shielded / unshielded.
Technical Data
Temperature Range :
i) For PVC -40°C to +70°C & +90°C
ii) For EPR -40°C to +125°C
Voltage Rating : 600V, 0.6/1.0 kV, 1.8/3 kV
Approvals
ISO 9001, ISO 14001, OHSAS 18001
RoHS compliance & REACH compliance
Leading Customers
Gamesa Renewable Pvt.Ltd, Popular system, Regen Power Tech & overseas customers.
Product Details:
| Insulation Material | PVC |
| Armoured | Yes |
| Conductor Type | Solid |
| Size | 19mm |
| Number of Core | 4 Core |
Siechem is leading manufacturer & exporter of Wind Energy Cables. These cables are manufactured with electrolytic high conductivity 99.9% pure copper, insulated with PVC / HDPE / Electron Beam Irradiated Elastomeric compound, shielded with Al.mylar tape with ATC drain wire, screened with ATC braiding, sheathed with PVC / EBXL-XLPO compound having enhanced UV properties and flexibility.
Specification: VDE 0282, UL 21098, IEC 60227, IEC 60502-1 & customized to your specification.
Types of Cable: SIS / XHHW-2, RHH / RHW-2, UL Type TC & UL Type SIS Type SIS / XHHW-2.
Features
Electron beam cross linked
No flame propagation
Low corrosivity of gases
Excellent Flame retardant, UV protection & Ozone resistance
Highly resistive to oil, chemicals, soil and mechanical damage
High insulation performance
Lower transfer impedance
Highly short circuit rated and earth fault resistant cable
Low smoke density
Applications
Used in dry, damp interiors, switch cabinets, electronic equipment, trains, buses and high voltage applications
Used in wind turbines and transmission of energy from generator to transformer
Used in Power lines of fixed routing in wind tower installation
Used for measuring and controlling purposes in wind turbines
Used for main power layout from the nacelle to the base of the wind tower
Used in mobile equipments and agricultural machinery
Product Construction
Conductor : Soft-annealed electrolytic copper
Insulation : Rubber compound, PVC, EPR & EBXL-XLPO.
Outer Sheath : Polychloroprene rubber compound, PVC & HF XL EVA.
Single or multicore, shielded / unshielded.
Technical Data
Temperature Range :
i) For PVC -40°C to +70°C & +90°C
ii) For EPR -40°C to +125°C
Voltage Rating : 600V, 0.6/1.0 kV, 1.8/3 kV
Approvals
ISO 9001, ISO 14001, OHSAS 18001
RoHS compliance & REACH compliance
Leading Customers
Gamesa Renewable Pvt.Ltd, Popular system, Regen Power Tech & overseas customers.
Product Details:
| Insulation Material | PVC |
| Armoured | Yes |
| Conductor Type | Stranded |
| Size | 18mm |
Siechem is leading manufacturer & exporter of Wind Energy Cables. These cables are manufactured with electrolytic high conductivity 99.9% pure copper, insulated with PVC / HDPE / Electron Beam Irradiated Elastomeric compound, shielded with Al.mylar tape with ATC drain wire, screened with ATC braiding, sheathed with PVC / EBXL-XLPO compound having enhanced UV properties and flexibility.
Specification: VDE 0282, UL 21098, IEC 60227, IEC 60502-1 & customized to your specification.
Types of Cable: SIS / XHHW-2, RHH / RHW-2, UL Type TC & UL Type SIS Type SIS / XHHW-2.
Features
Electron beam cross linked
No flame propagation
Low corrosivity of gases
Excellent Flame retardant, UV protection & Ozone resistance
Highly resistive to oil, chemicals, soil and mechanical damage
High insulation performance
Lower transfer impedance
Highly short circuit rated and earth fault resistant cable
Low smoke density
Applications
Used in dry, damp interiors, switch cabinets, electronic equipment, trains, buses and high voltage applications
Used in wind turbines and transmission of energy from generator to transformer
Used in Power lines of fixed routing in wind tower installation
Used for measuring and controlling purposes in wind turbines
Used for main power layout from the nacelle to the base of the wind tower
Used in mobile equipments and agricultural machinery
Product Construction
Conductor : Soft-annealed electrolytic copper
Insulation : Rubber compound, PVC, EPR & EBXL-XLPO.
Outer Sheath : Polychloroprene rubber compound, PVC & HF XL EVA.
Single or multicore, shielded / unshielded.
Technical Data
Temperature Range :
i) For PVC -40°C to +70°C & +90°C
ii) For EPR -40°C to +125°C
Voltage Rating : 600V, 0.6/1.0 kV, 1.8/3 kV
Approvals
ISO 9001, ISO 14001, OHSAS 18001
RoHS compliance & REACH compliance
Leading Customers
Gamesa Renewable Pvt.Ltd, Popular system, Regen Power Tech & overseas customers.
Product Details:
| Power/Voltage | 600V |
| Length | 19mm |
Siechem is leading manufacturer & exporter of Wind Energy Cables. These cables are manufactured with electrolytic high conductivity 99.9% pure copper, insulated with PVC / HDPE / Electron Beam Irradiated Elastomeric compound, shielded with Al.mylar tape with ATC drain wire, screened with ATC braiding, sheathed with PVC / EBXL-XLPO compound having enhanced UV properties and flexibility.
Specification: VDE 0282, UL 21098, IEC 60227, IEC 60502-1 & customized to your specification.
Types of Cable: SIS / XHHW-2, RHH / RHW-2, UL Type TC & UL Type SIS Type SIS / XHHW-2.
Features
Electron beam cross linked
No flame propagation
Low corrosivity of gases
Excellent Flame retardant, UV protection & Ozone resistance
Highly resistive to oil, chemicals, soil and mechanical damage
High insulation performance
Lower transfer impedance
Highly short circuit rated and earth fault resistant cable
Low smoke density
Applications
Used in dry, damp interiors, switch cabinets, electronic equipment, trains, buses and high voltage applications
Used in wind turbines and transmission of energy from generator to transformer
Used in Power lines of fixed routing in wind tower installation
Used for measuring and controlling purposes in wind turbines
Used for main power layout from the nacelle to the base of the wind tower
Used in mobile equipments and agricultural machinery
Product Construction
Conductor : Soft-annealed electrolytic copper
Insulation : Rubber compound, PVC, EPR & EBXL-XLPO.
Outer Sheath : Polychloroprene rubber compound, PVC & HF XL EVA.
Single or multicore, shielded / unshielded.
Technical Data
Temperature Range :
i) For PVC -40°C to +70°C & +90°C
ii) For EPR -40°C to +125°C
Voltage Rating : 600V, 0.6/1.0 kV, 1.8/3 kV
Approvals
ISO 9001, ISO 14001, OHSAS 18001
RoHS compliance & REACH compliance
Leading Customers
Gamesa Renewable Pvt.Ltd, Popular system, Regen Power Tech & overseas customers.
Product Details:
| Power/Voltage | 1kv |
| Length | 10mm |
Siechem is leading manufacturer & exporter of Wind Energy Cables. These cables are manufactured with electrolytic high conductivity 99.9% pure copper, insulated with PVC / HDPE / Electron Beam Irradiated Elastomeric compound, shielded with Al.mylar tape with ATC drain wire, screened with ATC braiding, sheathed with PVC / EBXL-XLPO compound having enhanced UV properties and flexibility.
Specification: VDE 0282, UL 21098, IEC 60227, IEC 60502-1 & customized to your specification.
Types of Cable: SIS / XHHW-2, RHH / RHW-2, UL Type TC & UL Type SIS Type SIS / XHHW-2.
Features
Electron beam cross linked
No flame propagation
Low corrosivity of gases
Excellent Flame retardant, UV protection & Ozone resistance
Highly resistive to oil, chemicals, soil and mechanical damage
High insulation performance
Lower transfer impedance
Highly short circuit rated and earth fault resistant cable
Low smoke density
Applications
Used in dry, damp interiors, switch cabinets, electronic equipment, trains, buses and high voltage applications
Used in wind turbines and transmission of energy from generator to transformer
Used in Power lines of fixed routing in wind tower installation
Used for measuring and controlling purposes in wind turbines
Used for main power layout from the nacelle to the base of the wind tower
Used in mobile equipments and agricultural machinery
Product Construction
Conductor : Soft-annealed electrolytic copper
Insulation : Rubber compound, PVC, EPR & EBXL-XLPO.
Outer Sheath : Polychloroprene rubber compound, PVC & HF XL EVA.
Single or multicore, shielded / unshielded.
Technical Data
Temperature Range :
i) For PVC -40°C to +70°C & +90°C
ii) For EPR -40°C to +125°C
Voltage Rating : 600V, 0.6/1.0 kV, 1.8/3 kV
Approvals
ISO 9001, ISO 14001, OHSAS 18001
RoHS compliance & REACH compliance
Leading Customers
Gamesa Renewable Pvt.Ltd, Popular system, Regen Power Tech & overseas customers.
Product Details:
| Power/Voltage | 600V |
| Length | 19mm |
Siechem is leading manufacturer & exporter of Wind Energy Cables. These cables are manufactured with electrolytic high conductivity 99.9% pure copper, insulated with PVC / HDPE / Electron Beam Irradiated Elastomeric compound, shielded with Al.mylar tape with ATC drain wire, screened with ATC braiding, sheathed with PVC / EBXL-XLPO compound having enhanced UV properties and flexibility.
Specification: VDE 0282, UL 21098, IEC 60227, IEC 60502-1 & customized to your specification.
Types of Cable: SIS / XHHW-2, RHH / RHW-2, UL Type TC & UL Type SIS Type SIS / XHHW-2.
Features
Electron beam cross linked
No flame propagation
Low corrosivity of gases
Excellent Flame retardant, UV protection & Ozone resistance
Highly resistive to oil, chemicals, soil and mechanical damage
High insulation performance
Lower transfer impedance
Highly short circuit rated and earth fault resistant cable
Low smoke density
Applications
Used in dry, damp interiors, switch cabinets, electronic equipment, trains, buses and high voltage applications
Used in wind turbines and transmission of energy from generator to transformer
Used in Power lines of fixed routing in wind tower installation
Used for measuring and controlling purposes in wind turbines
Used for main power layout from the nacelle to the base of the wind tower
Used in mobile equipments and agricultural machinery
Product Construction
Conductor : Soft-annealed electrolytic copper
Insulation : Rubber compound, PVC, EPR & EBXL-XLPO.
Outer Sheath : Polychloroprene rubber compound, PVC & HF XL EVA.
Single or multicore, shielded / unshielded.
Technical Data
Temperature Range :
i) For PVC -40°C to +70°C & +90°C
ii) For EPR -40°C to +125°C
Voltage Rating : 600V, 0.6/1.0 kV, 1.8/3 kV
Approvals
ISO 9001, ISO 14001, OHSAS 18001
RoHS compliance & REACH compliance
Leading Customers
Gamesa Renewable Pvt.Ltd, Popular system, Regen Power Tech & overseas customers.